CONSOLIDATED BEARING 6024-2RS Single Row Ball Bearings

Basic dynamic load rating C:9.36 kN; Fatigue load limit Pu:0.12 kN; Calculation factor Y2:2.8; B:12 mm; da min.:17.6 mm; Calculation factor Y1:1.8; Permissible angular misalignment α:3 °; D:37 mm; Basic static load rating C0:2.16 kN; Calculation factor kr:0.04;

Accessories:Seal & Snap-Ring; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating Co:49000 N; D:130.0000 mm; B:25.00 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:66300 N; Oil Speed Rating Open/Shielded n2:5600 rpm; Grease Speed Rating n1:4800 rpm; d:75.000 mm;

Pu:570 kN; Limiting speed for lubrication with:0 min-1; Grease:1080 kN; Static (Cor):73 mm; Weight:0 min-1; B1:mm; d:130 mm; B2 B Dynamic (Cr):mm; D1:mm; Oil:111.350 kN;

r1s (min):1.1 mm; d2:50 mm; D:90 mm; b1:mm; b:mm; s:1.6 mm; Pu:8.150 kN; F:60 mm; Dynamic (Ca):63.1 kN; d2 (max):mm;

H:495.3 mm; P180°:267 kN; Max. speed for Taconite seal:425 r/min; Bearing:22340 CCK/W33; RG:1 NPT; H2:101.6 mm; Ca:147.803 mm; P120°:249 kN; A1:228.6 mm; Mass pillow block:441 kg;

Basic Static Radial Load Rating Co:208000 N; Grease Speed Rating n1:2600 rpm; Basic Dynamic Radial Load Rating C:187000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3600 rpm; d:75.000 mm; Accessories:One Shield & Snap-Ri; B:71.40 mm; Sealed Speed Rating n3:2600 rpm; D:160.0000 mm;

B:28 mm; d:60 mm; Mass inner ring:0.21 kg; F:70 mm; r, r1,2 min.:1.1 mm;

Accessories:87000 Shield & Seal; Basic Radial Load Rating-Dynamic DC:3320 N; Old MRC Bearing Number:38FSF1; Speed Rating-Single and Double Sealed Grease SDG:23000 rpm; Basic Interchange BCA:-; d:8.000 mm; Fillet Radius ra:0.30 mm; Width - Overall B:10.3 mm; Basic Radial Load Rating-Static SCO:1370 N

d:440 mm; C:450 mm; Basic dynamic load rating C:7810 kN; D:620 mm; Mass bearing:440 kg; D1 ≈:556.3 mm; α:20 °; K:9 mm; b:16.7 mm; F:487 mm;

B:30 mm; D:55 mm; Tolerance housing:H7 m/s; d:50 mm; Coefficient of friction µ max.:0.15; Mass bushing:0.1 kg; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:1 m/s; Tolerance shaft:f7 m/s; Coefficient of friction µ min.:0.08;

Lw:21.8 mm; r2 max.:1 mm; Dw:3.5 mm; r1,2 min.:0.3 mm; r1 max.:0.8 mm; Mass needle roller:1.65 g;

da:74.612 mm; J min.:198.438 mm; Limiting speed:3400 r/min; L:265.113 mm; H2:57.15 mm; H1:82.55 mm; Mass bearing unit:9.53 kg; A1:95.25 mm; S:0.794 mm; J max.:223.838 mm;

Coefficient of friction µ max.:0.15; Tolerance shaft:e7; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; D:20 mm; Coefficient of friction µ min.:0.08; B:12 mm; Specific static load factor K0:45 N/mm²; D1:25 mm; Permissible sliding velocity v max.:0.5 m/s;

B4:30.15 mm; Lock washer:W 32; Lock nut:AN 32; d:160 mm; Sleeve:S 132x5.3/8; Threads per inch:8; d1:136.525 mm; Hydraulic nut:HMVC 32E; B:26.441 mm; B1:150.114 mm;

Accessories:Two Shields; Basic Dynamic Radial Load Rating C:956 N; Oil Speed Rating Open/Shielded n2:69000 rpm; d:4.800 mm; Shielded or Sealed B1:5.0 mm; Width Plain B:4.0 mm; Grease Speed Rating Open/Shielded n1:57000 rpm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:490 N; Sealed S